中文

Description：
The Through Bolts is made of carbon steel or stainless steel. This anchor is assembled with a three-segment expansion clip and endowed with long threaded rod, allows fastening on stiff material (concrete, natural stone). The pre-assembled nut and the washer DIN 125 allows a fast installation and the shape of expansion clip avoid the rotation of the anchor while tightening the nut

Material Specification：

Component	Standard	Mechanical Properties
Anchor body	EN 10263	Carbon steel
Drive pin	EN 10263-4	Carbon steel
Corrosion protection	EN ISO 4042	Zinc plating, Min.5 μm

Product Detail

Through Bolts

Features

Typical Application

Product Selection

Techincial Data

Performance Data

Download

• Made from cold-formed carbon steel, zinc-plated to 5µm

• Two embedment depths for a wide range of fastening thicknesses

• Raised impact section prevents thread damage during installation

• Pre-assembled to save time

• Drill bit size is same as anchor size for easy installation.

• Steel structures

• Column base plates

• Seatings

• Barriers

• Cable racks

• Handrails

• Ladders

• Façade systems

Part Number	Size	Diameter (mm)	Length (mm)	Drill Dia (mm)	Box (pcs)
600105022	M8 × 75	8	75	8	100
600106030	M8 × 90	8	90	8	100
600106040	M10 × 90	10	90	10	100
600106050	M10 × 100	10	100	10	50
600106065	M12 × 100	12	110	12	50
600106050	M12 × 110	12	110	12	50
600106065	M12 × 120	12	120	12	50
600106050	M16 × 120	16	120	16	25
600106065	M16 × 140	16	140	16	25

Size	d (mm)	L (mm)	d0 (mm)	h1 (mm)	tfix (mm)	hef (mm)
M8 × 75	8	75	M8	65	5	48
M6 × 30	8	90	M8	70	20	48
M6 × 40	10	90	M10	70	10	55
M6 × 50	10	100	M10	85	25	55
M6 × 40	12	100	M12	85	10	65
M6 × 50	12	110	M12	85	18	65
M6 × 40	12	120	M12	100	20	65
M6 × 50	16	120	M16	100	5	84
M6 × 65	16	140	M16	110	23	84

* d = Anchor diameter, L= Total length, d0= Drill hole diameter, h1= Min. Drill hole depth, tfix= Fixture thickness, hef=Effective anchorage depth,

Anchor size	M8		M10		M12		M16
hef (Effective anchorage depth ) ≥	30	40	40	50	50	65	65	80
Tensile (KN)	8.3	12.0	12.0	14.0	14.5	20.0	26.5	36.1
Shear(KN)	8.3	8.5	12.8	14.4	17.0	55	42.4	42.4

Through Bolt - Technical Manual-2016-Bloomin.pdf

2.21MB

Download